Many companies will encounter printer jams when printing, so what should I do if I encounter printer jams ? When encountering this problem, it must be very heart-wrenching. How should we solve this problem? First, let's take a look at how to solve the problem of printer jam . First, the reason for jamming may be that the parts that come in and out of the paper are broken, that is, the paper roll shaft. Therefore, when the machine executes the print command, it will cause paper jam. Here's how to deal with the printer jam , how to solve:

First, remove the jammed paper from the paper feed area of ​​the printer.

First of all, the jammed paper should be taken out from the paper tray, so that the printer will not work, and it is convenient to check the specific problem. When taking the paper, it is necessary to pay attention to some problems: in the paper feeding area, if You can see some edges of the paper, then you can pull the paper straight out of the edge. If you can't see the edge of the paper, you need to open the top cover to find the paper. If the paper card is very tight, do not force the paper and try to remove the paper from the top tray so that the paper does not break and cannot be removed. Then just put the paper back on. This makes it easy to solve the problem of how the printer jams .

Second, remove the jammed paper from the top cover area

This method must be careful, because the top cover contains toner. To remove the jammed paper, be sure to take the toner cartridge out first, then pull the paper out of the printer. Be careful when doing this. Slowly pull, do not tear the paper, in order to avoid loose toner, you can use a dry cloth to clean the toner that may be scattered, so as to avoid loose toner entering the printer, causing printer malfunction, if the toner is not careful When you get the clothes, you can wipe them off with a dry cloth, then wash the clothes with cold water. Do not use hot water, because hot water will let the toner penetrate into the clothes.

The above is some solutions to the problem of printer jam . The first thing to pay attention to is not to forcefully pull the paper, but to observe whether it is stuck in the paper feed, whether the paper is not flat, so it leads to The phenomenon of paper jam occurs. During the process of taking paper, you should also pay attention not to tear the paper strongly. Otherwise, the damaged paper will remain in the printer, and the same fault will occur in the next printing.

Aluminum Diamond Plate

Aluminum Diamond Plate 3003-H22 is easy to fabricate and its raised diamond pattern provides good slip resistance and walking stability.

Application and uses of Aluminum diamond tread plate 3003-H22 bright are: extensive product use as scuff plates, running boards, and mud flaps for fire engines, ambulances, fire trucks, trailers and toolboxes, recreational, and four-wheel-drive vehicles.

Aluminum Diamond plate sheet

Xiaoxian RuiYi Commercial Trade Co.,Limited , https://www.ryaluplate.com