Luya wheel cup selection and maintenance tips
Sport Bag,Gym Bag For Men,Leather Gym Bag,Small Sports Bag LIYONG BAG , https://www.hoyo-bags.com
September 28 11:07:58, 2022
In the early stages of fishing, we need to prepare a lot of objects. For example, in the Asian fishing method, we need to use the Lua Wheel. The line cup is one of the steps for installing the lure wheel. However, many netizens now have doubts. Is it better to use the deep line cup in this Asian round? Xiao Bian summed up the experience of some senior phishers and summed it up with a few points. We can use them for reference.
Luhe round deep cup or shallow cup
1, each has its own strengths. What equipment is used is determined by the target fish.
2, shallow line cup for thin lines, playing less grams of bait is better. The deep line cup has a large storage line and is suitable for long shots.
3, in fact, the 500-2000 type of spinning wheel, line cup depth are similar. If the line is fine enough, the deep line cup is also stress-free.
4. If you play sea fishing, they are the wheels of the big deep-line cups.
5, 2500 will be more room, do not have to worry about large objects, 1000 is also a bit small, suitable for fishing small fish.
6, 1.5 line with 1000 on the line, 2500 is too heavy too hard to use, 2500 is also a shallow line cup, it is recommended to look at the weight of the wheel.
Lule Wheel Size Selection Tips: The choice of wheels is based on your fishing ground and your nephew as well as the fish you are fishing. It is certainly a bit funny to use a 6-foot raft with a 5000 wheel on the shore. Shore Road, within 2.1 meters of the dumplings, the 2000 model is more appropriate; 2.4 meters 2500; 2.7-3 meters 3000-4000 models are more appropriate; 3-3.6 meters of 4000-5000 models are more appropriate; of course not exactly the same, I Just saying that the average user chooses to make a comparison, there is always a lot of advantages for bigger wheels or for giants with big fishing grounds.
Fishing wheel maintenance, line cup maintenance, simple maintenance to advanced maintenance methods
After each return from the sea fishing, the used fishing vessels, fishing rods, fishing lines, fishing baits and other equipment should be washed with fresh water and dried before they can be stored.
1. The simple maintenance of the fishing vessel mainly includes the washing of the line cups, handles, main bearings and the lubrication of the mating surfaces. This kind of maintenance is suitable for daily cleaning and maintenance of short-term sea fishing. Fishing friends can complete their own, without the depth of the disassembly of the fishing vessel. Simply remove the reel's line cup and handle and rinse the surface with fresh water and dry. Before installation, check the grease of each matching hole and surface, and add less. Then, it will be returned as it is.
2. The moderate maintenance of the fishing vessel is suitable for maintenance work during the long-term fishing. Slightly more complicated than simple maintenance, you need to remove the line cup holder, open the gear box cover on the main frame to let the water vapor naturally evaporate, then refuel it and install it back. This work is suitable for more experienced fishing friends.
3. The advanced maintenance of the fishing vessel is to disassemble all the fishing vessels and clean the components to sludge. This kind of work is complicated and parts need to be completely removed. It is best to send the fishing wheel to a professional maintenance point. If the fishing friend has a certain knowledge of mechanical maintenance, you can also try it yourself.
4. In addition, the over-the-line pulley is a place that is often neglected during maintenance. When a stuck condition occurs, it will cause serious damage to the fishing line. After dismantling, first check whether the running of the bearing is smooth, then clean the sludge, and then install a small amount of grease on the pulley hole and the bearing hole.