Big chunks are also fragile to teach you to properly maintain the composite machine
The compound machine is widely used in the office, and the efficiency is very high, but don't think that the compound machine is huge, its life will last for a long time. Like many high-tech office equipment, the compound machine also needs us to use it properly and daily. Maintenance will make it prolong life. Today, Xiaobian introduces several ways to properly use and maintain the composite machine: First of all, pay attention to the use environment of the composite machine and good post-maintenance. Due to the large working load of the compound machine, it should be effectively and regularly maintained, and it should be changed to a good working environment for the compound machine. First of all, ensure that the compound machine works in a clean environment, keep the compound machine away from dust as much as possible, and at the same time, ensure that the working environment of the compound machine is relatively dry and not wet, and do not place too heavy items on the top plate of the compound machine to avoid the environment. Or the effect of foreign objects on the copier. Also be careful not to place hard objects around the compound machine or on the fuselage, especially metals such as paper clips or pushpins. Once these metals fall into the compound machine, they will scratch the internal parts of the compound machine, and the metal will contact the working circuit board, causing the internal electronic components of the copier to short-circuit and damage the compound machine. In addition, during the use, no matter whether the power supply, cable, or paper jam is removed, the power of the composite machine must be cut off before the operation can be performed. The live operation will cause current impact and is easy to break down. The circuit board of the compound machine. When doing regular maintenance, do not use chemical solvents, or use a damp cloth with a hard texture to clean dust, paper scraps, and stains inside the machine. Do not use paper products such as tissue paper to clean the copier. Internal, so as not to leave paper scraps in the compound machine. The second is the correct operation and use. In addition to the correct operation of the multifunction machine step by step, you need to use and set up correctly. For example, simple paper feeding also requires care. Properly placing the copied paper not only ensures that the printing is performed normally, but also effectively eliminates the paper jam in the copying machine. When in use, the user should follow the instructions to place the copy paper in the input tray, to ensure that the machine is not out of paper during use, and to pay attention to the flatness of the position when placing the copy paper in the input tray, and to ensure Do not place the paper too full, and the guides of the input tray should be adjusted to be as wide as the paper. In addition, you need to use high-quality copy paper, and in the process of paper-feeding, shake the paper first to see if there is any foreign matter in the paper. When there is a paper jam in the process of use, you should first turn off the power of the compound machine, then open the cover of the composite machine, and slowly take the jammed paper out of the copier, instead of forcibly pulling the jammed paper out, avoiding The paper scratches the surface of the drum during the pulling process. In addition, when using the multi-functional machine, do not directly turn off the multi-functional machine. Instead, when it is determined that there is no copying task within 40 minutes, turn off the power of the multi-functional machine. This saves power and ensures that the copier does not start up frequently. If there are fragmentary copying tasks within 40 minutes, let the copier work in a state of energy saving, avoiding component aging and excessive loss caused by frequent startup of the copier. Also, pay attention to the consumables used. The use of consumables directly determines the imaging effect of the copier. If the toner cartridge is scratched, it will not only affect the imaging effect, but also cause damage to the inside of the machine in severe cases. Therefore, the protection of the toner cartridge is very important. The first is the placement of the toner cartridge. When the user takes out the toner cartridge from the copier, care must be taken not to allow strong light to come into contact with the drum surface. Because strong light can cause damage to the toner cartridge, when the strong light is irradiated to the photosensitive drum for a long time, it will cause the photosensitive drum to fail, resulting in printing failure. Therefore, when placing and handling the toner cartridge, the toner cartridge must be properly placed in a dark place, and be careful not to touch the toner cartridge with your hands. Because the grease on your hands may permanently damage the surface of the drum, which affects the copying effect. The quality of the used toner cartridge also needs to be selected. Because inferior toner will cause a lot of dust, which will cause damage to the human body itself or to the copier. Dust caused by inferior toner is easy to cause conductive effect inside the compound machine, burning the circuit board of the composite machine; Moreover, the inferior toner will cause damage to the photosensitive drum, and the scratches will cause great copying effect. influences. 1. Lift freely, can stand can sit alternate office, stand sit alternate do not hinder busy business at hand. Adjustable Height Work Tables,Electric Standing Tables,Sit Stand Computer Table,Electric Height Adjustable Table Suzhou CHEX Intelligent Technology Co., Ltd. , https://www.sjqxhdesk.com
2. It's easy to operate, just press the button to achieve the purpose of alternate standing and sitting.
3. Memory function storage: that is, the user can adjust the function key to a suitable height according to his own height, and adjust the function key to a fixed position to facilitate the fixed position and use.
4. The appearance is simple and generous, which is in line with the international office trend and different from the traditional desk style which is dull and not easy to move.
5. It is beneficial to the physical and mental health of office workers, increases work efficiency, enlivens the workplace atmosphere and makes the workplace atmosphere more active.