4 ways to choose the right wardrobe

[ Chinese wardrobe network ] No matter how big the house is, there are always a few wardrobes in the house. However, when I encountered the selection of the wardrobe, I was a little bit bigger in the moment. Choosing the fragrant board or the solid wood particle board? Choose a separate wardrobe or a custom closet? Is the sliding door still open?

Today Xiaobian teaches you 4 strokes to solve the wardrobe selection syndrome!

First select wardrobe style

The style of the wardrobe is mainly based on the decoration style of the home. The wardrobe mainly has sliding door wardrobes, swing door wardrobes, and open wardrobes. Each has its own advantages and different shapes and materials. You can not be restricted by the monotonous wardrobe in the big shopping mall. Thinking, closing the door, Xiaobian wants to put the map!

1. sliding door wardrobe

2. Swing door wardrobe

3. Open wardrobe

Because the use of wooden wardrobes is relatively common, here are the main tips for choosing wooden wardrobes:

Wooden wardrobes should be selected

The main panels of the wardrobe are mainly divided into three types: Hexiang board, solid wood particle board and MDF board. Let's get to know it first.

Hexiang board: This is a new type of ecological and environmentally-friendly artificial board. It uses rice straw and other crop straws from nature as the main raw materials, and uses polyurethane-based ecological glue which is completely free of formaldehyde as the binder. It is smooth, smooth and uniform in structure, and has a solid board surface. It has obvious advantages compared with particle board.

Composite solid wood, moisture-proof board, solid wood paint-free board: both moisture-proof, environmentally friendly, and cost-effective. These kinds of plates have high requirements for production equipment. Many brands on the market currently use these plates as the main materials for the cabinets.

Particleboard and MDF: A piece of wood made from wood or other lignocellulosic material that has been processed through a series of processes. The particleboard is supported by molded wood and does not require glue to be more environmentally friendly. MDF is also called MDF. It is pressed by wood powder and has better flatness. It is more suitable for boring and milling. It is usually used to make door panels, such as baking varnish and moulding (blistering). However, everyone should pay attention to the fact that some small manufacturers will use solid wood particle board to consider the cost, and the ordinary glue will be used, and the environmental performance will be very poor.

MDF

Solid wood particle board

Thickness of wooden wardrobe door panel and edge band

Because the wardrobe door is used most frequently in daily life, everyone should first pay attention to the thickness of the door panel. Generally, the thickness of the door panel of the wardrobe is between 5 cm and 9 cm, and the thickness of the door panel with good quality will be 9 cm to 12 cm.

The thickness of the wardrobe edge band is 0.4mm, 1mm, 1.5mm and 2mm. A too thin edge banding has a poor hand feel, and a thick edge banding and a gap at the edge banding are large. In general, the optimum thickness of the edge band is 1.5 mm.

Check the hardware of the wardrobe

One should look at the door lock switch, the big wardrobe should be equipped with 3 dark hinges; the second is to check the back of the wardrobe. If it is a mirror-like wardrobe, it depends on whether the mirror is deformed or not, and whether the mercury is lining at the back of the mirror. Paper and backboard. Third, it is necessary to check the veneer wardrobe and the seams are not strict.

Matt Gold Dish Rack

Matt Gold Dish Rack,Golder Color Dish Rack,Silicone Dish Drying Rack,Golden Dish Drying Rack

Jiangmen Xinhui Siqian Xiangyi Metalwork Factory , https://www.xydryingrack.com