First, the product name
Paper Dispersing Agent
Second, the main technical indicators
Appearance: white granules or powder
Solid content: ≥ 88%
UL Viscosity: 3.0-5.0 cps
Water insolubles: ≤ 0.05%
Dissolution time: ≤ 90 minutes
Third, performance and use
This product can increase the viscosity of pulp, disperse fibers or fillers, and the copied paper is even and smooth with no holes;
It is not easy to break paper and powder during papermaking, and the papermaking performance is stable. At the same time, it can increase the pulling strength and wet and dry strength of paper products, save pulp, increase the paper discharge rate by 15%, and greatly increase the speed of vehicles. It is suitable for all types of paper.
Fourth, the use of methods and precautions
1. This dispersant is formulated for 0.1-0.5% solution use. Disperse one kilogram of dispersant evenly into one ton of water. Note that it should be scattered while stirring. Dissolve it in a 40-mesh screen and dilute into a dilute solution for one hour. Diluted with 3-5 times of water when using.
2. It should be added as much as possible before joining in the net. It can be added to the cage, sand tray or high tank. However, adding the cage directly with a dropper equal to the width of the cage is the best, and the flow is controlled by the valve.
3. In general, the amount of ton of paper used is 500-1500 ppm, but it varies depending on the paper produced and the filler added.
V. Packaging and Storage
25kg paper bag (lined with plastic bag)
750kg large bag (woven bag)
This product is non-toxic, pay attention to moisture, rain, in the storage and transportation process to prevent high temperature and exposure.
The storage temperature is preferably 0-35 °C.
The main indicators and performance uses of paper dispersants
August 03 13:03:46, 2019
V-Boom's Industrial Co.Ltd , http://www.v-booms.com