Heat waves rolling! Drink cool mineral water to fight the hot summer! Bottle of Jing-Hui Mountain? We have noticed that the mineral water bottle of Jingtian Mountain is not only a beautiful bottle, but also has a good feel. Try using 3D CAD software to model mineral water bottles! Zhongwang 3D is a very powerful 3D CAD software. The unique hybrid modeling technology can greatly improve the efficiency of design work. Let's share with you today, how to use the 3D CAD software of Zhongwang to carry out bottle modeling of Jingtian 100-year-old mountain mineral water.

Create the bottle side

1. Create a cylinder that is the same size as the actual product, in millimeters.

2. To extract a u-line on the cylinder, you can select the "feature point" mode in the right-click menu when you select the point coordinates, so that you can accurately capture a structure line on the quadrant of the cylinder and get a The "front" line in the u direction.

3. Execute the array on the generated line.

4. Delete the 2 lines of 0o and 90o so that they appear on the front as shown in Figure 4.

5. Create a sketch, extract the "face profile reference" and "curve reference", and draw the graphic by drawing lines, trimming, and filleting commands, and connect the five segments to a single curve.

6. Return to the part environment and project the sketch onto the cylinder.

7. Use Generate Tube, select "Reserve Curve" and array out of 3 more.

8. Perform a combination model and remove the groove face and the top and bottom faces leaving only the sides.

9. Create another smaller radius cylinder at the center.

10. Project the curve that was retained when the pipe was drawn on the small cylinder, and then hide the cylinder and array the curve.

11. Use stakeout, select only two adjacent curves at a time, and select “none” in continuous mode to obtain a connection method that is only connected, so that it is convenient to control the radius when performing subsequent fillets, and 8 concaves are repeated for 8 times. The surface of the groove.

12. Make rounded corners

At this point, the modelling of the bottle of the Jingshan Mountain's mineral water bottle was completed. Next I will gradually share with you the modeling of mineral water bottle bottom and bottle mouth with Zhongwang 3D. If you are interested, you can also try it yourself.

Think about what pieces of cookware you need before setting out to the shops.  There is no point in buying a 20 piece set if you will only end up using a few pieces.

Buying a Cookware Set is usually a lot cheaper than buying piece by piece.  But again if you are not going to use all the pieces then really consider if a set is worth the money.

Buy the best you can buy for your money.

You can choose the size as you prefer to be a set. There are many different series for your choose. Also you can do different coating, such as non-stick coating, ceramic coating, marble coating and granite coating.

Packing: color box/set

Pressed aluminum Cookware Set

Non-Stick Coating Cookware Set,Aluminum Coating Cookware Set,Ceramic Coating Aluminum Cookware Set,Non-Stick Aluninum Coating Cookware Set

OSFE INDUSTRIAL CO.,LTD , http://www.1758cookware.com