Automatic Small Pure and Mineral Bottle Filling Machine

Model NO.: RFC-W Series
Filling Principle: Atmospheric Pressure
Packaging Container Lifting Structure: Pneumatic Lifting
Structure: Rotary
Packaging: Bottle
Packaging Material: Plastic
Material: Ss304
Warranty: 12 Months
Name: Pure and Mineral Filling Machine
Trademark: Blissum
Transport Package: Wooden Case
Specification: ISO
Origin: China
HS Code: 84223010
Automatic Small Pure and Mineral Bottle Filling Machine

Water Filling Line:

We not only offer stand-alone but also offer full line solution,About the whole line,From Water Treatment system----- Bottle Blowing Machine-----Filling System ----- Packaging System
1,RO Water Treatment Process
Source water tank -----> Source water pump-----> Quartz sand filter-----> Active Carbon filter----->PP sediment filter-----> RO main machine----->Pure water tank----->Filling System

RO Standard Features:
(1) PLC controller in-build, full-automatic working;
(2) High rejection thin film RO membranes;
(3) 304stainless Stainless steel machine frames;
(4) Durable & Efficient 304Stainless Steel Pressure source water Pump and Booster Pump & motors;
(5) Electronic control pan;
(6) Panel Mount Flow Meters  (product water & concentrate);
(7) Pressure regulator valves;
(8) Oil-filled pressure gauges for inlet and concentrate;
(9) 304stainless steel Heavy-duty pressure tubing and connector for the RO system.

2,Full Automatic Bottle Blowing Machine
Air Compressor-----> Air Storage----->Air Filter----->Air Dryer----->Air Filter----->Water Chiller----->Preform Feeder-----> Full automatic Blow Molding machine

Features:
(1) Stable performance with advanced PLC;
(2) Conveying preforms automatically with conveyor;
(3) Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater;
(4) High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus;
(5) High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure;
(6) Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine;
(7) Strong clamping force with high pressure and double crank links to lock the mold;
(8) Two ways of operating: automatic and manual;
(9) Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand;
(10) Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process;
(11) Contamination is avoided for the bottle body;
(12) Ideal effect of the chilling with the chilling system;
(13) Easy installation and starting;
(14) Low rejection rate: less than 0.2 percent.

3,Filling System (Mainly machine is Tribloc Rinser Filler Capper)
This machine works harmoniously with air-conveyor belt, It holds the bottles by the neck, thus, reducing the possibility of bottles falling over during conveying process.
This machine is used to fill still water into pet bottle and with screw caps capping function.
This machine integrated three function: 1. Rinse the empty pet bottle, 2. filling the rinsed bottles, 3. capping the filled bottles.

4.Packaging System
Including Ink Printer,Automatic Sleeve Labeling Machine&Shrinking Tunnel and Automatic Shrinking Film Wrapper
The Features Of Labeling Machine:
(1) PLC control, full-automatic working;
(2) Touch-screen control panel, easy operate;
(3) Full cover Main engine:Make the operator safety work;
(4) Adjustable blade base: Unique cut off, double blade for long using life;
(5) Single positioned adjustable central transmission post, more stable label transmission;
(6) Screw rod of separate bottle: stable transportation of bottles;
(7) Label brushing set: more accuracy of label-casing precision;
(8) Label control sensor shelf: original creation tail surface and sensor are combined to improve the precision of cutting the material;
(9) Sensor control, no bottle no label insert;
(10) 304 stainless steel machine frame.

Parameters of Water Filling Bottling Machine:
Main technical parameters 
Model RFC-W 14-12-5 RFC-W16-16-5 RFC-W24-24-8 RFC-W32-32-8 RFC-W40-40-10 RFC-W50-50-15 RFC-W60-60-15 RFC-W72-72-18
Capacity  3,000-5,000bph 5,000-8,000bph 10,000-12,000bph 15,000bph 18,000bph 22,000-24,000bph 28000-30,000bph 36,000bph
Suitable bottle φ=50-110mm H=160 -310mm     200-2500ml PET bottles 
Power  2.42kw 3.12kw  3.92kw 3.92kw 5.87kw 7.87kw 11.37kw 11.37kw
Dimension  2360x1770x2700 2760x2060x2700 2800x2230x2700 3550x2650x2700 4700x3320x2700 5900x4150x2700 5770x5290x2700 6540x4900x2700
Weight 2500kg 3500kg 3800kg 4200kg 5000kg 8500kg 11000kg 13000kg

Welcome to our factory to visit our machines,Please contact:
Miss Jenny
Phone+86 17751206109
 
Website:www.blissum.com