Shanghai Haozhuang teaches you how to buy a good small spray dryer

Shanghai Haozhuang follows the policies of survival by quality, development by science and technology, efficiency by management, and reputation by service. It is good for every set of equipment, every project, every link, the price is affordable, the quality is guaranteed, and the quality is upheld The first concept, to be a product that customers can rest assured.

The Hao Zhuang (LNB) brand small spray dryer L-6000Y spray dryer (spray dryer / spray dryer) produced and developed by Shanghai Haozhuang Instrument Co., Ltd. and it is mainly suitable for universities, research institutes and food, pharmaceutical and chemical enterprise laboratories Production of micro-particulate powder, with broad-spectrum applicability to all solutions such as emulsions and suspensions, suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc., because the materials sprayed are only The particles are only exposed to high temperature when they become mist-shaped particles, so they are only heated instantaneously, which can keep these active materials from being damaged after drying.

Product structure characteristics of Shanghai Haozhuang small spray dryer:

● Original imported nozzle, high efficiency.

● Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.

● Fully automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, the running animation is displayed on the touch screen, the running process is clearly displayed; just press the stop button when shutting down, the machine will automatically shut down Haozhuang.

● Manual control: if you need to adjust the process parameters during the experiment, you can easily switch to the manual state, and the color touch screen dynamic display (animation) throughout the experiment

● Equipped with nozzle cleaner (through needle), when the nozzle is blocked, it will be automatically cleared, and the frequency of the needle can be adjusted automatically.

● Shutdown protection function: just press the stop button when shutting down, the machine will stop running immediately except for the fan, Haozhuang guarantees that the equipment will not burn out due to misoperation (forced shutdown of the fan)

● The spraying, drying and collecting systems are made of transparent high-quality borosilicate heat-resistant glass materials, so that the drying process can be carried out in a non-polluting environment.

● Built-in imported oil-free air compressor, the particle diameter of the powder spray is normally distributed, the fluidity is very good, the noise is very low, less than 60db.

● The atomization structure of the two-fluid spray, the whole machine is made of high-quality stainless steel material, compact design, no additional equipment.

● The design of dry temperature control adopts Haozhuang real-time control PID constant temperature control technology, so that the temperature control in the whole temperature zone is accurate, and the heating temperature control accuracy is ± 1 ℃.

● In order to keep the sample pure, equipped with air inlet Filter.

● The feeding volume can be adjusted by feeding peristaltic pump, the minimum sample volume can reach 50ml.

● The particle size of the finished dry powder after drying is relatively uniform, and more than 95% of the dry powder is in the same particle size range.

● For the sticky materials, there is a nozzle cleaner (through needle), which will be automatically cleared when the nozzle is blocked, and the frequency of the needle can be adjusted automatically.

● Innovative tower wall purge device, the material recovery rate is higher.

The inlet temperature of the small spray dryer produced by Shanghai Haozhuang Instrument Co., Ltd. (LNB) is controlled at 30 ℃ ~ 300 ℃, the outlet temperature is controlled at 30 ℃ ~ 140 ℃, and the amount of evaporated water is 1500mL / H ~ 2000ml h, the maximum feed volume is 2000ml / h (adjustable), the feed method is peristaltic pump adjustment, the minimum feed volume of Haozhuang small spray dryer is 50mL, the temperature control accuracy is ± 1 ℃, Haozhuang average drying The time is 1.0 ~ 1.5S, the power of the whole machine is 3KW / 220V, and the external dimensions of the small spray dryer of LNB brand are the external dimensions of 1200mm (height) × 650mm (length) × 500mm (width)

Shanghai Haozhuang strictly abides by the credibility and commitment, and is willing to win the trust of the majority of users with the best quality and service. We have a professional technical team to create high-quality products for customers, so we choose high quality!

Polyamide Screen Print Mesh

Custom Polyamide Screen Mesh,Polyamide Screen Mesh,Polyester Silk Screen Printing Mesh,Micron Screen Print Mesh

shaoxing gesheng wire mesh co., ltd , https://www.gscreenmesh.com